Cart 0
atlp40wn.jpg
Pre-Order

• Pre-Order : Audio Technica "AT LPW40WN Fully Manual Belt-Drive" Turntable

RM 1,360.00

Audio Technica 

Pre-Order now!
Once you place an order, this item will be deliver to you within 3 - 10 days.

Purchase from Authorized Dealer and come with 1-year Warranty.

The AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. 
It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM. The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½”-mount headshell with an AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application. The AT-LPW40WN is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

 FEATURES:

• Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
• Motor features a speed-sensor system to maintain accurate platter rotation speed
• Fully manual operation
• Adjustable dynamic anti-skate control
• Professional anti-resonance, die-cast aluminium platter with rubber mat
• AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus
• AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest
• Anti-resonance MDF (medium density fiberboard) plinth with walnut simulated wood veneer
• Built-in switchable phono pre-amplifier for phono or line-level output
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover
 

SPECIFICATIONS:
• Type - 2-speed, fully manual operation
• Motor - DC servo motor w/speed stability control
• Drive Method - Belt drive
• Speeds - 33-1/3 RPM, 45 RPM
• Turntable Platter - Die-cast aluminium
• Wow and Flutter - 0.15% (WTD) @ 3 kHz (JIS)
• Signal-to-Noise Ratio - >60dB
• Output Level - Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec // Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain - 35 dB nominal, RIAA equalized
• Power Supply Requirements - 100-240V AC, 60 Hz
• Power Consumption - 1 W
• Dimensions - 420.0mm W x 340.0mm D x 116.9mm H
• Weight - 4.7kg
• Accessories Included - AT-VM95E phono cartridge; AT-HS4 headshell; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; rubber mat; dust cover; 45 RPM adapter
• Tonearm type - Balanced straight tonearm with detachable headshell
• Effective arm length  - 223.6mm
• Overhang - 18.6mm
• Tracking error angle - <2 degrees
• Applicable cartridge weight - 12-17g
• Anti-skating range - 0-3g
• Replacement Stylus  -AT-VMN95E